Check the complete order
Match the curtain labels, track lengths, brackets, gliders and controls to the correct opening. Lay fabric on a clean surface and keep each set of fittings together.
Curtains
Curtains Installation Guide
Prepare the opening and identify the supplied hardware before following the fitting sequence for your system.
Mark a level track position
Confirm the chosen mounting height, projection and ends. Check for suitable support above or behind the mounting surface. Use the supplied track instructions to determine bracket spacing and fixings.
Assemble and secure the track
If the supplied track is joined, use the instructions for that exact track and heading. Check gliders and end stops, then secure the track according to its fixing system.
Hang the fabric in sequence
Follow the supplied hook or S Fold carrier arrangement. Support the weight of the curtain while hanging it and check that the heading sits evenly.
Settle and test the curtains
Arrange the folds, check the finished drop and open and close the curtains across the full track. Fit any supplied wand or control parts. Use the matching instructions for motor limits and remote pairing.
Final checklist
- Parts and window labels matched
- Suitable fixing surface confirmed
- Mounting positions checked before drilling
- All supplied safety fittings installed
- Full movement tested
Product instructions and downloads
Use the current My Direct instructions for the exact system you order. They include the product-specific dimensions, hardware details and downloadable resources.
Open My Direct instructions (opens in a new tab) ↗Your next step
Keep the whole window in mind.
Take your measurements, photos and chosen material together when reviewing the final configuration.
